Spacetalk Adventurer 1
Support for your device
Adventurer is rated as IP67 water and dust resistant. It has been tested submerged at a depth of 1m for 30mins. This rating means that Adventurer will be more tolerant to splashes, accidental submersion and rain. However we do not recommend actively swimming, bathing or showering with Adventurer fitted.
Learn more
To wake Adventurer double tap anywhere on the screen.
The power button on Adventurer is located on the bottom cover next to the charging contacts.
On the Map tab in the Spacetalk app that the Adventurer is paired to press Call and select the 'Video Call' option.
On Adventurer, tap the 'Video Call' menu icon, then tap on the contact you wish to start a video call with.
By default, the Primary Account Holder is able to make Video Calls to and from the watch. Other users can be granted access to make video calls to and from the watch by using Device Sharing. Please refer to "Sharing Spacetalk with Trusted People" section of our FAQ's.
As Adventurer is a wearable, Video Calls put a higher demand on battery and data consumption. After a Video Call, there is a short period of down-time during which further Video Calls cannot be made. Currently Video Calls are restricted to 2 minutes in duration, and a further 2 minutes down-time between calls.
During Video Calls, Adventurer will consume slightly more battery than a regular Voice Call. For this reason, we recommend to balance the use of Video Calling and Voice Calling to maximise your daily battery consumption.
On average, Video Calls will use around 6-7MB of data per minute of call.
Video Calling can be disabled through the Spacetalk app that the device is paired to. From the Map or Home tab, select the device you wish to disable Video Calling for. Enter the Settings menu and scroll to 'Advanced Settings', then turn off the switch labelled 'Enable Video Calls'.
A Video Call cannot be made on Spacetalk Adventurer if the watch:
- Has less than 30% battery
- Is connected to the charger
- Doesn't have a data connection
- Is within the down time period after a Video Call has been made
- Is already in a Video Call
- Is in School Mode with Video Calling disabled
- Has less than 30% battery
- Is connected to the charger
- Doesn't have a data connection
- Is within the down time period after a Video Call has been made
- Is already in a Video Call
- Is in School Mode with Video Calling disabled
At this stage group Video Calls are not supported.
Feelings allows your child to send you a real-time mood, heart rate and recent step count update right from their Adventurer to your Spacetalk app so you can gain an insight into their wellbeing. Spacetalk app users can also send a Feelings request to their child from the quick action card on the Map window.
Spacetalk is a consumer-grade general wellness device, not a certified medical device. Spacetalk wellness features are not intended to be a diagnostic medical device or to replace a caregiver's judgment of health and wellness issues. The information provided on this website or the Spacetalk mobile application is not a substitute for obtaining proper professional care or services. You should seek independent advice from a medical professional as required.
Spacetalk is a consumer-grade general wellness device, not a certified medical device. Spacetalk wellness features are not intended to be a diagnostic medical device or to replace a caregiver's judgment of health and wellness issues. The information provided on this website or the Spacetalk mobile application is not a substitute for obtaining proper professional care or services. You should seek independent advice from a medical professional as required.
Feelings is available on Spacetalk Adventurer. Currently, Feelings is not available on Spacetalk Kids or Spacetalk Life.
To request your child's feeling, tap on the 'Map' Button, then tap on the child's quick action card. Tap on 'Feelings' then tap 'Send Request'. Once you have sent the Feelings request, your child will receive a notification on the watch and be able to let you know how they are feeling.
On Adventurer, tap 'Feelings' then tap on the person that you wish to send the feeling to. Tap on the feeling you want to share and then tap the send button.
Feelings can be viewed in the Spacetalk app. Primary Account Holders can choose which Shared Users can also view Feelings. To update which Shared Users can view Feelings, in the devices settings menu, tap 'Feelings', then toggle the switch to the on position to enable.
Yes, Feelings can be enabled or disabled in the Spacetalk app. To disable Feelings, in the device's settings menu, tap 'Feelings' then toggle the 'Enable Feelings' switch to the off position.
Feelings is available on Adventurer devices from software version ST2-4G-1_20220927 and Spacetalk app version 5.2.0.15 on iOS or 5.2.0.21 on Android. Please ensure both your Adventurer and Spacetalk app are up to date.
Once a Feelings request has been received, it will be active for a period of 10 minutes. During this time, it is not possible to make another request. Once your child's feeling has turned grey, you can request another feeling.
Step count goals are set through the Spacetalk app. To set a goal tap on the 'Home' button, then tap on the device. Under 'Fitness' tap the settings icon to set a step count goal.
Funny Sounds is a feature that allows a selection of fun sounds to be played through the speaker of the Spacetalk Adventurer. Laughter, animals, musical instruments and even whoopees.
Funny Sounds can be disabled on the Spacetalk Adventurer through the Spacetalk app that the device is paired to.
Go to the 'Home' or 'Map' tab in the Spacetalk app and select the device you wish to disable Funny Sounds for, press Funny Sounds, then turn off the switch labelled 'Enable Funny Sounds'.
Go to the 'Home' or 'Map' tab in the Spacetalk app and select the device you wish to disable Funny Sounds for, press Funny Sounds, then turn off the switch labelled 'Enable Funny Sounds'.
When a Spacetalk Adventurer is in School Mode, sound is muted. The Funny Sounds icon on the Adventurer will automatically be disabled during School Mode.
On Adventurer, go to the Chat app and select the Chat Contact you wish to send a Funny Sound to. Tap the icon with the three dots, then tap the Funny Sounds icon. Select the Funny Sound you wish to send, then press the send icon in the top right corner.
Funny Sounds is available on Adventurer devices from software version ST2-4G-1_20220927 and Spacetalk app version 5.2.0.15 on iOS or 5.2.0.21 on Android. Please ensure both your Adventurer and Spacetalk app are up to date.
At this time, Funny Sounds are limited to the pre-defined selection.
From Adventurer firmware version ST2-4G-1_20220927, Wi-Fi is available in the Settings menu and can be connected to 2.4Ghz 802.11bgn Wi-Fi access points.
On Adventurer, swipe down from the top of the screen then press and hold the Wi-Fi icon. Move the Wi-Fi switch to the on position, then press '+' in the top right corner. Select the Wi-Fi network SSID you wish to connect to, then enter the password for that network. Finally, press the blue tick to confirm and connect.
A SIM card must be installed in your device during the pairing process.
Yes, Adventurer will work on most 2G, 3G and 4G mobile networks In New Zealand, Asia and Europe. It may not work reliably in the USA or Canada because of different mobile frequency bands.
Adventurer model ST2-4G-1 will work on 4G Bands: B1/B3/B5/B7/B8/B20/B28 and 3G Bands:B1/B5/B8. Where GSM networks are still available 2G: 900/1800MHz.
Check this link to find your country and identify the mobile frequency bands in use.
Adventurer model ST2-4G-1 will work on 4G Bands: B1/B3/B5/B7/B8/B20/B28 and 3G Bands:B1/B5/B8. Where GSM networks are still available 2G: 900/1800MHz.
Check this link to find your country and identify the mobile frequency bands in use.
Short location update intervals (e.g. 5 minutes) are not recommended for day to day use as they will consume the battery faster. For the best battery performance, we suggest using Adventurer's Location on Demand feature in combination with a longer update interval or interval updates turned off.
Keeping Adventurer software up to date will also ensure you can benefit from the latest battery optimisations.
If you are using a pre-paid SIM card, it is also recommended to check that your SIM card has credit balance on it as Adventurer’s battery life can be impacted due to data connectivity issues.
Keeping Adventurer software up to date will also ensure you can benefit from the latest battery optimisations.
If you are using a pre-paid SIM card, it is also recommended to check that your SIM card has credit balance on it as Adventurer’s battery life can be impacted due to data connectivity issues.
On Adventurer, swipe from top to bottom on the touch screen to reveal the battery level, network signal strength, settings, volume and brightness control.
You can check the battery level in a variety of ways. On Adventurer swipe from top to bottom on the touch screen to reveal the battery level. From the Spacetalk app, the battery level will be displayed next to the device name on the map screen. Spacetalk will also send notifications to the Spacetalk app when the battery level reaches 15% or below.
The supplied charging cradle magnetically attaches to the rear of Adventurer. Plug one end of the supplied USB-C cable into the charging dock and the other end into a USB power source.
To charge your Adventurer, it is recommended to connect the USB cable to a 5V/1Amp USB power supply.
Yes, Adventurer has a 4G mobile phone built into the watch. You will require a Nano SIM card, which is the smallest of the SIM cards available. Your provider’s plan should include calls, SMS and 1GB of data per month.
Please note, some providers may not alert when a pre-paid sim card is low on credit. Sufficient call and data credit is required to access device functionality, including the SOS button. Please ensure sufficient credit is always available on pre-paid sim cards or utilise a post-paid sim card.
Please note, some providers may not alert when a pre-paid sim card is low on credit. Sufficient call and data credit is required to access device functionality, including the SOS button. Please ensure sufficient credit is always available on pre-paid sim cards or utilise a post-paid sim card.
Yes, Adventurer will work on all 3G and 4G mobile networks in Australia and New Zealand.
On Adventurer swipe from top to bottom on the touch screen to reveal the control center. Then tap 'Settings', then information and the watch's number will be displayed under 'Phone Number'. In certain cases the phone number may not register to the 'Phone Number' field. This is not a defect but rather a network operator issue where the numbers are dynamically assigned to the SIM card. If this occurs, check the Spacetalk app Settings menu for the phone number of the watch. Alternatively make a call to a contact and get them to recognise your Caller ID and provide it to you.
Adventurer rejects SMS messages from unknown numbers. These rejected messages are forwarded to the Spacetalk app and the user will receive a notification of the blocked message. When the Adventurer's balance is low most operators send an SMS to inform you.
Please note, some providers may not alert when a pre-paid sim card is low on credit. Sufficient call and data credit is required to access device functionality, including the SOS button. Please ensure sufficient credit is always available on pre-paid sim cards or utilise a post-paid sim card.
Please note, some providers may not alert when a pre-paid sim card is low on credit. Sufficient call and data credit is required to access device functionality, including the SOS button. Please ensure sufficient credit is always available on pre-paid sim cards or utilise a post-paid sim card.
On Adventurer swipe from top to bottom on the touch screen to reveal the battery level, network signal strength, settings, volume and brightness control.
The data connection is very important for normal operation of Adventurer. To check if there is an active data connection on Adventurer, swipe from top to bottom to reveal the control center. Then tap 'Settings', then 'Information' and under 'Network State' it should say connected if there is an active data connection.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap on the 'Home' button, then tap on the device. Under 'Watch Contacts' tap on the plus symbol to add a new contact. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
When an incoming call is received, Adventurer's screen will illuminate and details of the caller will be displayed. A green 'answer' button or red 'reject' button will be displayed.
Outgoing calls are limited to the list of contacts set up by the guardian using the Spacetalk app. From the clock screen on Adventurer, swipe right to left until you reach the Call app. Tap on Call to select from a list of contacts that your child is permitted to call.
Adventurer can be restricted to receive incoming calls and SMS/MMS messages only from people listed in Adventurer's contact list. In the Spacetalk app tap on the 'Home' button, then tap on the device, then tap 'Watch Contacts'. There is then an option to block calls from unknown numbers. This is set by default but guardians can choose to disable this feature to allow all incoming calls and messages.
Parents and guardians can define classroom periods that make Adventurer distraction free. When in School Mode, Adventurer is effectively a watch and other functions will be disabled. During School Mode, parents have complete control and can choose to selectively enable or disable features. For example, parents may choose to enable the step counter feature, while disabling the ability to make and receive calls. There is no risk of classroom distractions because Adventurer is silent in School Mode.
School Mode is a feature activated in your Spacetalk app. To set up a new School Mode tap on the 'Home' button, then tap on the device. Tap on 'School Mode' then tap the + symbol located in the bottom right corner and enter your desired preferences.
To disable or enable features in the Spacetalk app tap the 'Home' button, then tap on the device. Under 'School Mode' tap on a previously set School Mode, then tap 'Enable Features'. To enable a feature while Spacetalk is in School Mode simply turn the corresponding switch to on.
When School Mode is active on Adventurer two pencils will appear in the middle of the clock screen.
When first setup, Adventurer defaults to 15min periodic location updates. This can be changed between 5min and 1hr. It can also be turned off completely.
An aggressive periodic location update, for example 5min, will consume much more battery power than a 1hr location update.
You can completely disable the periodic location updates and use the Location on Demand feature.
An aggressive periodic location update, for example 5min, will consume much more battery power than a 1hr location update.
You can completely disable the periodic location updates and use the Location on Demand feature.
In your Spacetalk app, tap on the device on the map screen to reveal the pop up menu. Then tap 'Locate Me' and the Spacetalk app will start scanning for your child's GPS location. Soon, you'll have the most up-to-date location of your child.
Safe Zones are geo areas that are setup in the Spacetalk app. When the watch user arrives and leaves these pre-programmed zones, an optional notification will be sent to the Spacetalk app.
To set up a new safe zone, in your Spacetalk app, tap on the 'Safe Zones' icon on the map screen. Tap the purple '+' button and enter the address of the desired location. Once the Safe Zone has been created you will need to setup Safe Zone alerts. Note that for Safe Zones to work you must also enable automatic location updates.
To set up alerts for Safe Zones, in your Spacetalk app, tap on the 'Safe Zones' icon on the map screen. Tap on an existing Safe Zone and then tap on Manage Alerts. Multiple safe zone notifications can be configured and these can be customised to suit particular days.
In the Spacetalk app, tap on the 'Home' button, then tap on the device. Under the 'Watch Contact' section select a previously added contact and then mark this contact as an Emergency Contact.
In the Spacetalk app, tap on the 'Home' button, then tap on the device. Under the 'Watch Contacts' section tap on Edit, then tap and drag a contact in the list to change the sequence.
Wear detection uses the heart rate sensor to detect if Adventurer has been removed from the users wrist. Please note, Adventurer will only check if the watch has been removed every 15 minutes. For this reason wear detection notifications may be up to 15 minutes delayed.
To enable wear detection tap on the 'Home' button, then tap on the device. Under 'Advanced Settings' turn the 'Enable Wear Detection' option to on.
From the clock screen on Adventurer, swipe right to left until you reach the Message app. Tap on the message icon, then tap on the message thread you wish to reply to. To start a new message thread tap on the pencil symbol in the top right corner.
Messages can be viewed on Adventurer by tapping on the message menu icon.
When Adventurer receives a SMS message from an unknown number, it redirects it to the Spacetalk app. The message contents can be viewed in the Notifications within the Spacetalk app.
You may customise your own pre-set messages in the Spacetalk app. In the Spacetalk app, tap on the 'Home' button, then tap on the device. Tap on Chat/SMS Keyboard to add, delete and reorder messages to suit the Spacetalk user.
Yes, you can send recorded audio and attach pictures and short video's from the gallery by MMS. When creating a new Message on Adventurer, tap the 3 circles to revel the Microphone button. The user can record an audio message up to 15 seconds in length. Tap once to start recording and tap again to end.
On Adventurer, from the clock screen, swipe right to left until you reach the Weather app. It will show the weather now, hourly and daily forecast.
Parents can also check the weather at their child's location by tapping on the device to revel the pop up menu then tapping 'Weather' in their Spacetalk app.
Parents can also check the weather at their child's location by tapping on the device to revel the pop up menu then tapping 'Weather' in their Spacetalk app.
From the clock screen on Adventurer, swipe right to left until you reach the Alarm app. Tap on the '+' in the top right corner then enter your desired preferences.
To delete an alarm, from the clock screen on Adventurer, swipe right to left until you reach the Alarm app then hold down on the alarm you wish to delete.
To edit an alarm, from the clock screen on Adventurer, swipe right to left until you reach the Alarm app then tap on the alarm you wish to edit. Tap edit and update your desired preferences. Tap on the tick to save your new preferences.
To edit an alarm, from the clock screen on Adventurer, swipe right to left until you reach the Alarm app then tap on the alarm you wish to edit. Tap edit and update your desired preferences. Tap on the tick to save your new preferences.
Parent Alarms are alarms that are set and managed in the Spacetalk app. The watch user is unable to disable, enable or edit the parent alarms from Adventurer. 'Alarms' are set and managed Adventurer and are not visible in the Spacetalk app.
To set a 'Parent Alarm' tap on the 'Home' button, then tap on the device. Tap on 'Alarms' then tap the + symbol located in the bottom right corner and enter your desired preferences. '
Yes. Bluetooth connectivity is supported on Adventurer and the user is able to connect compatible devices for example Bluetooth headsets, Air pods and in-car Bluetooth systems. Currently Adventurer does not support Bluetooth enabled hearing aids which are medical devices and require a special type of Bluetooth connection.
On Adventurer, swipe from top to bottom to reveal the control center. Tap 'Settings', then scroll down and tap Bluetooth. Place your Bluetooth device into pairing mode. Refer to the manufacturers instructions of your Bluetooth device for further information how to do this. Once the Bluetooth device is in pairing mode, on Adventurer toggle the switch to "on" then tap the plus symbol in the top right corner. Adventurer will start to scan for nearby Bluetooth devices. If the Bluetooth device is compatible, it should quickly appear. Tap the found device to complete pairing.
It is possible to share access to Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Adventurer, please follow these steps:
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
In the Spacetalk app, tap on the device to revel the pop up menu. Tap on 'Settings' then 'Device Sharing'. You can remove shared access to a particular Adventurer watch from this menu.
Spacetalk Holdings Pty Ltd warrants Spacetalk Adventurer for one year and in-box accessories for one year against defects in materials and workmanship commencing from the date of retail purchase. Spacetalk accessories purchased separately are warranted against defects in materials and workmanship for six months from the original date of purchase.
Spacetalk’s express warranty is subject to certain exclusions, as set out in the warranty. For example, Spacetalk does not warrant the Spacetalk Adventurer watch or accessories for normal wear and tear, nor damage caused by accident or abuse.
Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:
• to cancel your service contract with us; and
• to a refund for the unused portion, or to compensation for its reduced value.
You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done, you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
Spacetalk’s warranty on the Spacetalk watch and its accessories contains additional relevant provisions, including concerning how to make a warranty claim. The full warranty can be downloaded from the download section of this site.
Spacetalk’s express warranty is subject to certain exclusions, as set out in the warranty. For example, Spacetalk does not warrant the Spacetalk Adventurer watch or accessories for normal wear and tear, nor damage caused by accident or abuse.
Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:
• to cancel your service contract with us; and
• to a refund for the unused portion, or to compensation for its reduced value.
You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done, you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
Spacetalk’s warranty on the Spacetalk watch and its accessories contains additional relevant provisions, including concerning how to make a warranty claim. The full warranty can be downloaded from the download section of this site.
After reading through the FAQs if you are still experiencing a problem, please visit the Troubleshooting page for further guidance and directions. If further assistance is needed please contact our customer support team.
Adventurer and the Spacetalk apps have been developed at our company's head office in Australia.
Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.
Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.
We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.
Our full privacy policy can be downloaded from the Download section located in our Support pages.
Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.
Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.
We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.
Our full privacy policy can be downloaded from the Download section located in our Support pages.
Yes, Spacetalk takes your privacy very seriously. Your personal information will always be stored domestically within Australia and the United Kingdom on highly secure servers. Please review our privacy policy for further information.
Your Spacetalk App and account information can be deleted in the Spacetalk App.
If you are the primary account owner, your account information and the data of all devices linked to your account will be deleted. If you are a shared user, your account information will be deleted and shared device links will be removed.
Your account will be deleted immediately and you will be logged out of all devices. Account deletion is permanent and cannot be reversed.
If you have an active subscription, please cancel it before proceeding with your account deletion.
To delete your account, in the Spacetalk App navigate to the ‘Settings’ menu. Tap ‘Manage Account’ then ‘Delete My Account’. Enter your Spacetalk account password and tap ‘Delete My Account’.
If you are the primary account owner, your account information and the data of all devices linked to your account will be deleted. If you are a shared user, your account information will be deleted and shared device links will be removed.
Your account will be deleted immediately and you will be logged out of all devices. Account deletion is permanent and cannot be reversed.
If you have an active subscription, please cancel it before proceeding with your account deletion.
To delete your account, in the Spacetalk App navigate to the ‘Settings’ menu. Tap ‘Manage Account’ then ‘Delete My Account’. Enter your Spacetalk account password and tap ‘Delete My Account’.
Adventurer has been manufactured using safe and hypoallergenic materials and fully complies with the EU Restriction on Hazardous Substances (RoHS) directive 2015/863/EU. Adventurer has also been extensively tested and is compliant with the European Union REACH regulations and has been tested and found compliant with 209 substances of very high concern, Nickel, Organic Tins, Polycyclic Aromatic Hydrocarbons (PAH). Adventurer has also been tested and complies with the EU POPs regulations for short chain chlorinated paraffin (SCCP’s). Details of these reports can be found in our EU Declaration of Conformity that can be downloaded from the download section of this website.
There are very strict international standards which govern the amount of radiation exposure against defined limits. Australia is among 40 other countries that adopt high standards designed to reduce exposure to harmful radiation.
The actual test is called Specific Absorption Rate (SAR) and this rate needs to be below 2W/kg averaged over 10g body tissue for proximity to head and 4W/kg averaged of 10g of body tissue for wrist worn. The highest measurement when Adventurer was tested was 0.85 W/Kg for front of face, and 0.60 W/kg for wrist worn.
SAR is among one of the very important tests that must be completed in order to be able place the Australian Regulatory Compliance mark (shown below) on our product. Adventurer displays this RCM mark in the Information menu under Regulatory Compliance section. As a publicly listed company, SPACETALK LTD has responsibility to conduct very thorough due-diligence on every product we offer for sale.
The actual test is called Specific Absorption Rate (SAR) and this rate needs to be below 2W/kg averaged over 10g body tissue for proximity to head and 4W/kg averaged of 10g of body tissue for wrist worn. The highest measurement when Adventurer was tested was 0.85 W/Kg for front of face, and 0.60 W/kg for wrist worn.
SAR is among one of the very important tests that must be completed in order to be able place the Australian Regulatory Compliance mark (shown below) on our product. Adventurer displays this RCM mark in the Information menu under Regulatory Compliance section. As a publicly listed company, SPACETALK LTD has responsibility to conduct very thorough due-diligence on every product we offer for sale.
Adventurer is a radio transmitter and receiver and is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. Care should be taken when using Adventurer in the situations described below:
AIRCRAFT
Switch off your wireless device whenever you are instructed to do so by airport or airline staff.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.
For Pacemakers:
Pacemaker manufacturers recommend that a minimum separation of 15cm be maintained between a mobile phone and a pacemaker to avoid potential interference.
AIRCRAFT
Switch off your wireless device whenever you are instructed to do so by airport or airline staff.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.
For Pacemakers:
Pacemaker manufacturers recommend that a minimum separation of 15cm be maintained between a mobile phone and a pacemaker to avoid potential interference.
Adventurer fully complies with all mandatory regulatory standards for sale of products in Australia and New Zealand. The Australian Communications and Media Authority (ACMA) are responsible for setting standards that all mobile communication products must be tested against. These tests include Electrical Safety, Electromagnetic Compliance (EMC), Specific Absorbtion Rate (SAR), Electromagnetic Radiation and various mobile network interoperability tests to name a few. Adventurer carries the Regulatory Compliance Mark (RCM) which is represented by a triangle with a small tick to prove it.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' scroll through the list to 'Factory Reset'. Adventurer requires a PIN number to avoid accidental reset. The PIN number is the last four digits of the IMEI number. The IMEI number can be found in the Information menu.
Important: Factory reset will wipe all user data including pictures and videos that may have been recorded. After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the device's previous settings to be restored.
Important: Factory reset will wipe all user data including pictures and videos that may have been recorded. After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the device's previous settings to be restored.
Adventurer will automatically check for a software update in the early hours of the morning. For this to occur Adventurer should be left powered on and charging overnight. If an update is available, Adventurer will automatically download and install it overnight.
You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.
The downloading of updates consumes mobile network data and may result in additional charges.
You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.
The downloading of updates consumes mobile network data and may result in additional charges.
The watch face can be changed remotely from the Spacetalk app. A digital and analogue watch face can be selected and a custom wallpaper image can be selected.
Adventurer will automatically update the time and the date from the network. There are no adjustments necessary.
In some cases (i.e. living close to the border between two time zones), Adventurer may detect an incorrect time. To solve this problem, you can also set the time and date manually. From the clock screen, swipe from top to bottom to reveal the control center. Tap 'Settings' then 'Date & Time' and toggle the 'Automatic date & time' switch to off.
In some cases (i.e. living close to the border between two time zones), Adventurer may detect an incorrect time. To solve this problem, you can also set the time and date manually. From the clock screen, swipe from top to bottom to reveal the control center. Tap 'Settings' then 'Date & Time' and toggle the 'Automatic date & time' switch to off.
To activate flight mode on Adventurer from the clock screen, swipe from top to bottom to reveal the control center . Tap 'Settings' then toggle the 'Flight Mode' switch to on.
JumpySIM is the new mobile network of choice for kids’ wearables. JumpySIM partners with the world’s biggest and best network operators to provide a mobile service specifically designed for wearables. Unlimited calls and text, and the right amount of data to be there when it counts so you don’t pay too much.
Spacetalk have partnered with JumpySIM because we wanted to make it as easy as possible for our customers to get their Spacetalk watches connected quickly and easily.
As a bonus, Spacetalk app fees will be waived for eligible JumpySIM customers for as long as they stay connected.
For more information or to get connected with JumpySIM, click here. T&C's apply.
Spacetalk have partnered with JumpySIM because we wanted to make it as easy as possible for our customers to get their Spacetalk watches connected quickly and easily.
As a bonus, Spacetalk app fees will be waived for eligible JumpySIM customers for as long as they stay connected.
For more information or to get connected with JumpySIM, click here. T&C's apply.
The Spacetalk app is available for download from the iOS App Store or the Google Play Store. Other platforms are currently not supported. Search for Spacetalk in either store.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap on the 'Home' button, then tap on the device. Under 'Watch Contacts' tap on the plus symbol to add a new contact. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
Contacts can only be deleted through the Spacetalk app. To do this tap on the 'Home' button, then tap on the device. Under 'Watch Contacts' select the contact you wish to delete. Remove contact will appear at the bottom of the app screen.
Phone Contacts are the people you allow your child to call or receive calls from and also send and receive SMS or MMS messages. These Phone Contacts do not necessarily need to have the Spacetalk app installed on their smartphone to call or send SMS/MMS messages.
Chat contacts are restricted to people who have the Spacetalk app installed or other Spacetalk devices. You can also share your group or huddle with other Spacetalk app or Spacetalk device users. A sharing code can be found in the Settings section of the Spacetalk app.
Chat contacts are restricted to people who have the Spacetalk app installed or other Spacetalk devices. You can also share your group or huddle with other Spacetalk app or Spacetalk device users. A sharing code can be found in the Settings section of the Spacetalk app.
With Adventurer and the Spacetalk app, you can now create a chat group to send messages to friends and family who are also using the Spacetalk app and devices. You can create one-to-one private chats, or chat groups.
The new Chat feature will allow you to create group messages with friends and family and can support one-to-one or one-to many communications.
Message app is the more traditional SMS and MMS messaging functionality that supports one-to-one messaging.
Message app is the more traditional SMS and MMS messaging functionality that supports one-to-one messaging.
In the Spacetalk app tap the 'Chat' symbol in the bottom right corner of the screen. Tap the purple New Message symbol. From here you will be able to invite a contact through email or by entering the persons Spacetalk ID.
Once you have added a contact to Chat in the Spacetalk app on the 'Home' button, then tap on the device. Under 'Chat Contacts'. Tap on the plus symbol then select the contact you wish to add to your Adventurer.
No. The Chat contacts and Phone contacts are a different set of contacts and need to be setup independently.
On Adventurer tap ‘Tap to pair’ then tap start. A QR code should appear on the watch. Now on the Spacetalk app, select 'Start Pairing’ from the app menu and tap the image of Spacetalk Adventurer. Set up the watch user‘s profile, then tap ‘Continue’. Scan the QR on the Adventurer using your mobile phone’s camera and then confirm the pairing on Adventurer. Tap ‘Get started’ on Adventurer and then complete the setup process on the Spacetalk app.
The maximum number of devices that can be registered against a Spacetalk account is 5 Spacetalk Kids devices & 5 Spacetalk Life devices. Please note that the number of enabled devices is limited by the type of the subscription for that account.
The maximum number of devices that can be enabled on a Spacetalk account is 5 Spacetalk Kids devices & 5 Spacetalk Life devices.
It is possible to share access to Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Adventurer, please follow these steps:
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Spacetalk Adventurer is eligible for a free Spacetalk app subscription when using a Spacetalk Mobile SIM card.
For more information or to get connected with Spacetalk Mobile, click here.
For more information or to get connected with Spacetalk Mobile, click here.
When you need to know where your loved one is, approximations are not good enough. As part as our commitment to safety, we utilise highly accurate location tracking systems. Unlike many other products on the market, we use a combination of Google-Maps powered Wi-Fi, cell tower triangulation and GPS to deliver the reliable locations, when you need it most. Part of your app subscription fee goes towards covering these geolocation fees.
Additionally, we take the security of your data extremely seriously. We use enterprise-grade server architecture to host our data to ensure that the highest safety protocols are followed. The hosting costs involved with these are also factored into your subscription.
We are also constantly updating our apps and product firmware with new features. To maintain our high quality control standards, our development team designs and writes all of this here in Australia, rather than outsourcing this work offshore. When you contact Spacetalk customer support, you talk to a real employee, someone who works with the product and prides themselves in providing the best possible outcome for our customers, someone that values the Spacetalk community.
Additionally, we take the security of your data extremely seriously. We use enterprise-grade server architecture to host our data to ensure that the highest safety protocols are followed. The hosting costs involved with these are also factored into your subscription.
We are also constantly updating our apps and product firmware with new features. To maintain our high quality control standards, our development team designs and writes all of this here in Australia, rather than outsourcing this work offshore. When you contact Spacetalk customer support, you talk to a real employee, someone who works with the product and prides themselves in providing the best possible outcome for our customers, someone that values the Spacetalk community.
Monthly subscriptions can be purchased for up to 2 devices or up to 5 devices. In Australia the price is AUD$5.99 and AUD$8.99 per month respectively. In New Zealand NZD$6.99 and NZD$9.99 respectively.
Alternatively get connected with Spacetalk Mobile and your Spacetalk App subscription is free. For more information or to get connected with Spacetalk mobile, click here. T&C's apply.
Alternatively get connected with Spacetalk Mobile and your Spacetalk App subscription is free. For more information or to get connected with Spacetalk mobile, click here. T&C's apply.
The primary Spacetalk account holder needs to have one active subscription to be able to set up and modify connected watches. Secondary Spacetalk account holders do not need to purchase a subscription if they are only sharing devices that a primary account holder has already set up.
Subscriptions can only be modified by the primary account holder that initiated the original subscription. To upgrade an existing subscription:
1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that was used initially to purchase the subscription.
3. Tap the 'Home' button, then tap 'Settings'
4. Tap 'Manage Subscription'
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription upgrade.
1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that was used initially to purchase the subscription.
3. Tap the 'Home' button, then tap 'Settings'
4. Tap 'Manage Subscription'
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription upgrade.
Subscriptions can only be modified by the primary account holder that initiated the original subscription. To downgrade an existing subscription:
1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that is used initially to purchase the subscription.
3. Tapthe 'Home' button, then tap 'Settings'
4. Tap 'Manage Subscriptions'.
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription downgrade.
1. Open your Spacetalk app on your smartphone.
2. Make sure that the current Google Play/App Store account that is used on the phone is the same as the account that is used initially to purchase the subscription.
3. Tapthe 'Home' button, then tap 'Settings'
4. Tap 'Manage Subscriptions'.
5. A list of the available subscriptions will be shown, select another subscription level and follow the prompts to complete the subscription downgrade.
Cancellation of subscriptions are done through the respective app store using the primary account originally used to set up the subscription.
For iOS
1. Go to Settings > [your name] > iTunes & App Store.
2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.
For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap cancel subscription.
5. Follow the onscreen instructions.
For iOS
1. Go to Settings > [your name] > iTunes & App Store.
2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.
For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap cancel subscription.
5. Follow the onscreen instructions.
It is possible to share access to Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Adventurer, please follow these steps:
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Adventurer and the Spacetalk apps have been developed at our company's head office in Australia.
Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.
Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.
We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.
Our full privacy policy can be downloaded from the Download section located in our Support pages.
Our systems incorporate industry best practice data security throughout and cannot be hacked or spoofed like other products in this category. All data transmitted between Spacetalk devices and our Spacetalk apps use enterprise-grade encryption. Data stored on our servers is encrypted and hosted in government and bank grade security centers in Australia and United Kingdom.
Spacetalk has been developed by SPACETALK LTD (ASX:SPA), an Australian publicly listed company and a pioneer and leader in school communications systems since 2003. SPACETALK has built a reputation for the highest-level data security and privacy through its schools business unit.
We are fully GDPR compliant and are constantly updating our systems and practices to ensure our users' data security and privacy.
Our full privacy policy can be downloaded from the Download section located in our Support pages.
Yes, Spacetalk takes your privacy very seriously. Your personal information will always be stored domestically within Australia and the United Kingdom on highly secure servers. Please review our privacy policy for further information.
Your Spacetalk App and account information can be deleted in the Spacetalk App.
If you are the primary account owner, your account information and the data of all devices linked to your account will be deleted. If you are a shared user, your account information will be deleted and shared device links will be removed.
Your account will be deleted immediately and you will be logged out of all devices. Account deletion is permanent and cannot be reversed.
If you have an active subscription, please cancel it before proceeding with your account deletion.
To delete your account, in the Spacetalk App navigate to the ‘Settings’ menu. Tap ‘Manage Account’ then ‘Delete My Account’. Enter your Spacetalk account password and tap ‘Delete My Account’.
If you are the primary account owner, your account information and the data of all devices linked to your account will be deleted. If you are a shared user, your account information will be deleted and shared device links will be removed.
Your account will be deleted immediately and you will be logged out of all devices. Account deletion is permanent and cannot be reversed.
If you have an active subscription, please cancel it before proceeding with your account deletion.
To delete your account, in the Spacetalk App navigate to the ‘Settings’ menu. Tap ‘Manage Account’ then ‘Delete My Account’. Enter your Spacetalk account password and tap ‘Delete My Account’.
Please refer to the Adventurer product page for the latest availability.
Adventurer comes in 5 different colour variants - Midnight, Coral, Cloud, Mist & Ocean.
Our online store will accept Visa, Mastercard and American Express credit cards. You may also make purchases using your PayPal account.
Yes! We offer both Afterpay and ZIP payment solutions for purchases made through our online webstore.
Depending on the method of shipment chosen, deliveries can be up to seven days within Australia. Due to the small nature of our products we offer regular post and express post. These can be chosen during checkout.
You will receive an email notifying when your shipment has been dispatched. Generally, from order placement to shipping will be 2 business days.
Shipping times:-
+ Australia Post (parcel post) - allow 2-7 business days depending on the destination.
+ Australia Post (express post) - next business day to most metropolitan areas.
+ More information on the Australia Post network can be obtained from this link.
You will receive an email notifying when your shipment has been dispatched. Generally, from order placement to shipping will be 2 business days.
Shipping times:-
+ Australia Post (parcel post) - allow 2-7 business days depending on the destination.
+ Australia Post (express post) - next business day to most metropolitan areas.
+ More information on the Australia Post network can be obtained from this link.
You will receive an email confirming your order has been placed. Please check your junk folder in case you have not received it. Once the shipment has been dispatched, you will also receive an email confirming the shipment has been sent and providing the tracking number for the shipment.
For online purchases through this website, we offer a 30 Day Satisfaction Guarantee. To be eligible for this guarantee, you must contact our Customer Support Team to request an RMA number within 30 days. For further details please see our returns policy in the download section.
In the unfortunate event that you have a problem with your product, please check the troubleshooting guide on our website. If you continue to have a problem, please contact our support team.
SPACETALK's warranty period is 12 months from date of original purchase. Full warranty terms and conditions can be found on our Support site in the downloads section.
We have compiled a list of troubleshooting steps which is regularly updated. These troubleshooting steps contain further instructions including how to return the product for repair.
We have compiled a Quick-start Guide to help you get Adventurer and the Spacetalk app up and running quickly. Click here to download the Quick Start Guide.
To wake Adventurer double tap anywhere on the screen.
The power button on Adventurer is located on the bottom cover next to the charging contacts.
The Spacetalk Adventurer is able to make a Video Call to the Primary Account Holder, and other Shared Users of the watch. Please refer to "Sharing Spacetalk with Trusted People" section of our FAQ's.
Video calling is available on Adventurer devices from software version ST2-4G-1_20220927 and Spacetalk app version 5.2.0.15 on iOS or 5.2.0.21 on Android. Please ensure both your Adventurer and Spacetalk app are up to date.
Ensure that the watch:
- Is connected to the mobile network by swiping down on the clock screen and checking that there are signal bars present
- Has an active data connection or SIM Card is not out of credit (Test the data connection by accessing the Weather app on Adventurer)
- If a Video Call has been made from the Adventurer recently, please wait a few minutes until the down-time period is complete before trying to make another Video Call
- Video Calls can't be made if the watch has less than 30% battery or is connected to the charger
- Check if Video Calling is disabled in the Spacetalk app (Child's Settings -> Advanced Settings -> Enable Video Calls) - Is within the down time period after a Video Call has been made
- Is already in another Video Call
- Is connected to the mobile network by swiping down on the clock screen and checking that there are signal bars present
- Has an active data connection or SIM Card is not out of credit (Test the data connection by accessing the Weather app on Adventurer)
- If a Video Call has been made from the Adventurer recently, please wait a few minutes until the down-time period is complete before trying to make another Video Call
- Video Calls can't be made if the watch has less than 30% battery or is connected to the charger
- Check if Video Calling is disabled in the Spacetalk app (Child's Settings -> Advanced Settings -> Enable Video Calls) - Is within the down time period after a Video Call has been made
- Is already in another Video Call
Short location update intervals (e.g. 5 minutes) are not recommended for day to day use as they will drain the battery faster. For the best battery performance, we suggest using Adventurer’s Location on Demand function in combination with a longer update interval or interval updates turned off.
Running the latest Adventurer software will keep you up to date with the very latest improvements and optimisations and some of these include battery life performance.
It is also recommend to check that your SIM card has credit balance on it as Adventurer’s battery life will be affected if your SIM card runs out of credit.
Running the latest Adventurer software will keep you up to date with the very latest improvements and optimisations and some of these include battery life performance.
It is also recommend to check that your SIM card has credit balance on it as Adventurer’s battery life will be affected if your SIM card runs out of credit.
It is normal operation for the light on the Charging Cradle to be RED whilst charging Adventurer. A solid GREEN light indicates Adventurer is fully charged or the charging dock may not be connected securely to Adventurer. There should always be either a GREEN or RED light illuminated on the dock.
If there is no light on the charging dock then this indicates that the dock is not receiving any power. Check the USB power source is working and if possible try an alternate power source. Also check the USB cable for damage or breakage.
To charge Adventurer, it is recommended to connect the USB cable to a 5V/1Amp USB power source.
It is normal operation for the light on the Charging Cradle to be RED whilst charging Adventurer. A GREEN charging light indicates Adventurer is fully charged.
On Adventurer swipe from top to bottom on the touch screen to reveal the battery level.
If Adventurer does not appear to charge, follow these steps:
1. Inspect the four gold contacts on the Charging Cradle and on the rear of Adventurer for damage.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Connect the charging dock to a USB power source. Once connected confirm the light on the charging dock is green. No light indicates possibly the USB power source or the USB cable maybe faulty.
4. attach the charging dock to Adventurer and confirm that the light turns to red after a few moments. This indicates that Spacetalk is charging.
5. Clean the gold contacts on the Charging Cradle and on Adventurer with a dry cloth.
6. Try to hold down the Power Button for 20 seconds to perform a soft reset.
On Adventurer swipe from top to bottom on the touch screen to reveal the battery level.
If Adventurer does not appear to charge, follow these steps:
1. Inspect the four gold contacts on the Charging Cradle and on the rear of Adventurer for damage.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Connect the charging dock to a USB power source. Once connected confirm the light on the charging dock is green. No light indicates possibly the USB power source or the USB cable maybe faulty.
4. attach the charging dock to Adventurer and confirm that the light turns to red after a few moments. This indicates that Spacetalk is charging.
5. Clean the gold contacts on the Charging Cradle and on Adventurer with a dry cloth.
6. Try to hold down the Power Button for 20 seconds to perform a soft reset.
When the dock is connected to the back of the watch, does the light illuminate Red? If not:-
1. Check to make sure the USB power source is working. A green light will indicate the charging dock is receiving power.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Check the charging contacts on the dock. Are they clean and visually look in good condition?
4. Check the charging contacts on the Adventurer watch. Are they clean and visually look in good condition?
1. Check to make sure the USB power source is working. A green light will indicate the charging dock is receiving power.
2. Ensure Adventurer is seated correctly on the charging cradle and the charging cradle is not upside down. The four gold contacts on the Charging Cradle should line up with the four gold contacts on the back of Adventurer.
3. Check the charging contacts on the dock. Are they clean and visually look in good condition?
4. Check the charging contacts on the Adventurer watch. Are they clean and visually look in good condition?
Depressing the Power Button on the underside of Adventurer for 20 seconds will perform a soft reset and will not wipe any user data.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' scroll through the list to 'Factory Reset'. Adventurer requires a PIN number to avoid accidental reset. The PIN number is the last four digits of the IMEI number. The IMEI number can be found in the Information menu.
Important: Factory reset will wipe all user data including pictures and videos that may have been recorded. After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the apps previous settings to be restored.
Important: Factory reset will wipe all user data including pictures and videos that may have been recorded. After Adventurer has been reset, the initial set-up procedure and watch pairing with the Spacetalk App will need to be repeated. If Adventurer has been paired previously with the same account, when performing the pairing process the Spacetalk app will allow the apps previous settings to be restored.
The microphone is very sensitive and under normal background noise levels, you should be able to hold the watch 20-30cm away from your mouth and be heard clearly by the receiver. When the background noise level is high, you may find that you need to hold Adventurer closer to your mouth.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Sound' to reveal the volume slider control. If the speaker volume is low ensure that the screen protector isn't covering the speaker port.
On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Brightness' to reveal the brightness slider.
In full sunlight conditions, the screen brightness maybe limited this is not a fault.
In full sunlight conditions, the screen brightness maybe limited this is not a fault.
Adventurer's watch face can be changed remotely from the Spacetalk app. A digital or analogue watch face can be selected and a custom wallpaper image can be added as a background image.
Clean Adventurer's display gently using a damp cloth. Also, completely power down Adventurer by holding the power button for 20 seconds to do a soft reset. Restart Adventurer and check if it has improved.
While in a call, the volume control appears on Adventurer's screen. Adjust the volume using this control. Additionally ensure the screen protector is not covering the speaker port.
Adventurer has a high quality noise cancelling microphone that is designed for use 20-30cm from your mouth. Speak at normal volume levels into the microphone.
Adventurer can be restricted to receive incoming calls and SMS/MMS messages only from people listed in Adventurer's contact list. In the Spacetalk app tap on the 'Home' button, then tap on the device, then tap 'Watch Contacts'. There is then an option to block calls from unknown numbers. This is set by default but guardians can choose to disable this feature to allow all incoming calls and messages.
If your number is listed in the contacts on Adventurer and your call is rejected, please check your caller ID settings of your mobile phone. Adventurer detects who is calling from your caller ID and determines if it will permit the call or reject the call. No caller ID will cause automatic call rejection from the watch.
This is most likely due to the ring volume level turned down or off. On Adventurer from the clock screen, swipe from top to bottom to reveal the control center. Tap 'Sound' to reveal the volume slider.
The watch must be paired to the Spacetalk app first before contacts can be added. Follow the pairing instructions in the Quick Start Guide, or this troubleshooting section under Account and Adding a Device.
Adventurer will only check if the watch has been removed every 15 minutes. For this reason wear detection notifications may be up to 15 minutes delayed.
Adventurer has been specifically designed to operate on the all 3G and 4G Networks in Australia and NZ.
In case you are experiencing poor coverage, check with your service provider about the coverage available in your area.
On Adventurer swipe from top to bottom on the touch screen to reveal the network signal strength. The network signal strength and the network name should be displayed. If it isn't, follow these troubleshooting steps:
1. Check that Flight Mode is not active.
2. Check to see if the SIM card has been inserted correctly. Follow the quick start guide instructions that can be obtained from the download section of this website.
3. Restart Adventurer by holding the power button for 20 seconds and after Adventurer has shut down, power Adventurer up again.
5. Confirm the SIM has been activated correctly. If in doubt, remove the SIM card from Adventurer and test it in another phone. Check that voice, SMS and data are working.
6. Confirm if the SIM has valid credit. If necessary, recharge the SIM using the operators recharge process.
7. If available, try another SIM card in Adventurer.
1. Check that Flight Mode is not active.
2. Check to see if the SIM card has been inserted correctly. Follow the quick start guide instructions that can be obtained from the download section of this website.
3. Restart Adventurer by holding the power button for 20 seconds and after Adventurer has shut down, power Adventurer up again.
5. Confirm the SIM has been activated correctly. If in doubt, remove the SIM card from Adventurer and test it in another phone. Check that voice, SMS and data are working.
6. Confirm if the SIM has valid credit. If necessary, recharge the SIM using the operators recharge process.
7. If available, try another SIM card in Adventurer.
When you update settings in the Spacetalk app, it is normal that these may take a few minutes for settings to be updated on Adventurer.
If they don't update, please check that Adventurer has a network connection, has credit on the SIM card and has an active data connection. A quick way to test the data connection is to check the Weather.
If they don't update, please check that Adventurer has a network connection, has credit on the SIM card and has an active data connection. A quick way to test the data connection is to check the Weather.
Adventurer will automatically check for a software update in the early hours of the morning. For this to occur Adventurer should be left powered on and charging overnight. If an update is available, Adventurer will automatically download and install it overnight.
You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.
Downloading of updates consumes mobile network data and may result in additional charges.
You may also check manually to see if there are any updates. To do this on Adventurer, from the clock screen, swipe from top to bottom to reveal the control center. Then tap 'Settings' then 'Software Update' and your watch will begin to check for any available updates.
Downloading of updates consumes mobile network data and may result in additional charges.
The Spacetalk app is available for download from the iOS App Store or the Google Play Store. Other platforms are currently not supported. Search for Spacetalk in either store.
Download and install the Spacetalk app from the appropriate store. When you first open the Spacetalk app it will prompt you to Register for a new account, alternatively Log In if you have an existing account.
It is possible to share access to Adventurer with multiple trusted users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders if they are only using sharing. To share Adventurer, please follow these steps:
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
Primary Account Holder
1. In your Spacetalk app, tap on the device you wish to share to reveal the pop up menu, then tap 'Settings’.
2. Tap ‘Device Sharing’ then tap the purple ‘Share Device’ button.
3. Enter the email address of the person you wish to share Adventurer with.
Secondary Account Holder
1. Use the link in the invitation to download the Spacetalk app.
2. Open the app and create a new Spacetalk account. (Note: when creating your new Spacetalk app account, you must use the same email address the invitation has been sent to)
3. Once you have created a Spacetalk account and are logged in, tap on the 'Home' button. The request should appear under 'My Devices'
4. Tap on the request and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk.
On Adventurer tap ‘Tap to pair’ then tap start. A QR code should appear
on the watch. Now on the Spacetalk app, select ‘Start Pairing’ from the app menu and tap
the image of Adventurer.
Set up the watch user‘s profile, then tap ‘Continue’.
Scan the QR code on Adventurer using your mobile phone’s camera and then confirm the pairing on
Adventurer. Tap ‘Get started’ on Adventurer and then complete the setup process on the Spacetalk app.
To remove an Adventurer device, in the Spacetalk app tap on the 'Home' button, then tap on the device. Tap on Advanced Settings then scroll to the bottom and click Remove Device.
You can add several Adventurer devices, but you can only enable the number of devices according to your active subscription level. In the Spacetalk app, tap on the 'Home' button, then tap on the device. Tap 'Advanced Settings' and then toggle 'Enabled' to on.
Cancellation of subscriptions are done through the respective app store using the primary account that the subscription was created.
For iOS
1. Go to Settings > [your name] > iTunes & App Store. 2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.
For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap Cancel subscription.
5. Follow the onscreen instructions.
For iOS
1. Go to Settings > [your name] > iTunes & App Store. 2. Tap your Apple ID at the top of the screen.
3. Tap View Apple ID. You might need to authenticate your Apple ID.
4. Tap Subscriptions.
5. Tap the subscription that you want to manage.
6. Use the options to manage your subscription. You can choose a different subscription offering, or tap Cancel Subscription to cancel your subscription. If you cancel, your subscription will stop at the end of the current billing cycle.
For Android Phone
1. On your Android phone or tablet, open the Google Play Store.
2. Tap Menu and then Subscriptions.
3. Tap the subscription you want to cancel.
4. Tap Cancel subscription.
5. Follow the onscreen instructions.
An unlimited number of contacts can be added to each Adventurer watch. Contacts are added in the Spacetalk app. To do this tap on the 'Home' button, then tap on the device. Under 'Watch Contacts' tap on the plus symbol to add a new contact. During set-up, a contact can be selected from your list of contacts on your smartphone or by adding a new contact. Contacts can also be flagged as emergency contacts for use when the Adventurer's SOS function is activated.
Contacts can only be deleted through the Spacetalk app. To do this tap on the 'Home' button, then tap on the device. Under 'Watch Contacts' select the contact you wish to delete. Remove contact will appear at the bottom of the app screen.
In the Spacetalk app, tap on the 'Home' button, then tap on the device. Under the 'Watch Contacts' section select a previously added contact and then mark this contact as an Emergency Contact.
In the Spacetalk app, tap on the 'Home' button, then tap on the device. Under the 'Watch Contact' section tap on Edit, then tap and drag a contact in the list to change the sequence.
Spacetalk Adventurer (model ST2-4G-1) requires a Nano SIM with unlimited voice calls, SMS and at least 1GB of data per month and will work on all 3G and 4G mobile networks in Australia and New Zealand.
Spacetalk recommends Spacetalk Mobile, which offers amazing coverage in Australia and affordable plans to choose from.
The best part is, your Spacetalk app subscription is free while you’re connected with Spacetalk Mobile.
Spacetalk Mobile keeps your family connected for less!
Please note: Spacetalk Mobile is compatible with Spacetalk Adventurer, Spacetalk Life, and Spacetalk Kids (Telstra edition) only.
For further information about Spacetalk Mobile click here to visit their website.
*On some mobile service providers, use of MMS Messaging services maybe a chargeable cost in addition to your basic plan. To avoid these costs, we recommend using the Chat message function to send and receive multimedia messages between devices.
Spacetalk Holdings Pty Ltd
104 Frome StreetAdelaide SA 5000
Australia
Telephone: (AU) 1300 087 423
(NZ) 0800 087 423
(Int) +61 (8) 8104 9588
Email: support@spacetalkwatch.com
Normal Hours: Mon-Fri, 9:00 am - 4:30 pm (AEST)